Welcome to Foshan Gaoming Yongshunfa Buliding Materials Industry Co.,Ltd
Opening Time
Allday 0.00 - 24.00
Email Us
Call Us Now

Problems to be aware of when operating the Polishing machine

Problems to be aware of when operating the Polishing machine

     First, we must not use high-speed polishing machine if the following conditions are found
     The operator has not received professional training.
     The operator has not learned the "safe operating procedures".
     The high speed polisher is not working properly.
     Second, before using the high-speed Polishing machine, the following checks should be made for the environment.
     The operator's hands and feet should be kept away from the rotating polishing head.
     The operator must not step on the power cord or wrap the power cord around the polishing head.
     The operator must dress safely.
     The polished area must not exceed the length of the power cord.
     The operator must not dispose of the operating handle. When the machine is stopped, the handle must be released after the high-speed polisher has completely stopped rotating.
                    Polishing machine
      Do not polish with a polishing pad that is dusty or dirty. When the polishing pad with too much dirt cannot be cleaned, replace it with time.

       When replacing or installing the polishing pad, the power must be turned off.

       Third, the storage of high-speed polishing machine

       cut the power supply.

       Tilt back and store the rear wheel on the ground.Do not store outdoors and store in a dry place.