Welcome to Foshan Gaoming Yongshunfa Buliding Materials Industry Co.,Ltd
Opening Time
Allday 0.00 - 24.00
Email Us
Call Us Now
+86-13322841199

Some tips for operating the Square Pipe Polishing Machine

Some tips for operating the Square Pipe Polishing Machine


          Square Pipe Polishing Machine is suitable for surface polishing, drawing and sanding of various straight tubes (rods). It can be finished in one time from roughing, fine sanding, throwing linen, throwing cloth, etc. It has the characteristics of stable work and low noise. . Today, the new Chuangsheng industrial polishing machine manufacturers Xiaobian for you to operate some of the tips of the automatic polishing machine.
Square Pipe Polishing Machine
          When operating the automatic polishing machine, it is necessary to accurately grasp the polishing rate. Too fast or too slow will cause damage to the polished object during the polishing process. The use of fine abrasives can greatly reduce the damage caused by polishing, but the polishing speed will also decrease. Polishing in stages can solve the problem of low efficiency. When polishing, rough polishing is performed first, and the damaged layer is ground, and then polished to remove the damaged layer. This not only speeds up the polishing process, but also reduces the damage. The new innovative custom automatic polishing machine spindle speed can reach 2000r/min, the feeding speed can be adjusted 1-5m/min, and the processing range diameter is 5-90mm.

          When the operator polishes the object, it is placed on the fixture, fixed on the workbench of the polishing machine, and then the automatic polishing machine is started to finish polishing. After the completion, the machine will automatically stop, and the operator will unload the polished object. Go down.